Request access to the field lighting system from the Club Admin

0484 024 519

Field 1 for 2 hours, (output)

F1.2 (Low output). F1hi.2 (Full power)

Turn Off

F1.0

Helensburgh Park Rugby League E-State Light Control System.pdf

  1. SMS Command Controller Number: 0484 024 519

Command Zones Affected Command Zones Affected F1 Field 1, 50 Lux F1Hi Field 1, 100 Lux F2 Field 2, 50 Lux F2Hi Field 2, 100 Lux

  1. Basic Usage  Allowed usage time-bands have been configured by Council. Within these times, authorised club users may text field lighting on or off, unless the fields are blacked-out due to ground conditions.  Command names are NOT case-sensitive. (e.g. f1Hi is also OK)  Commands are sent as ‘Name.Value’, with value as whole hours, or hours and minutes. E.g., To turn on Field 1, 100L lights for 3 hrs & 15 mins, text F1Hi.3.15 For whole hours, you don’t need to include minutes. E.g., Field 1, 100L for 3 hrs, just text F1Hi.3  Important: Only text the highest level needed. E.g. For Field 1, 100L for 2 hrs, just send F1Hi.2  Multiple commands can be sent in a single message, separated by one or more spaces:

F1.3 F2Hi.2 BMX.3

 If you finish training early, you can text F1.0 (and/or F2Hi.0, BMX.0) to turn off the lights immediately.  These commands should be retained in your phone text history for easy re-use. 3. Shared Field Usage (If applicable to this site)  Mobile numbers are grouped by club. An operating period for a zone is overridden by a subsequent command from the same club.  For shared fields, one club can turn off their usage, and the lights will remain on if a second club has turned them on for the same night.  “Supervisors” – usually only Council Officers – override everyone. 4. Advanced Usage – Helpful, but not necessary. Only use these commands for your convenience. Deferred Commands – Clubs may turn on lights at a deferred time.  These commands must be sent after 11.00 AM on any day, as all commands are cleared at 11:00am.  To defer a command, append the “@” symbol, followed by the “24-hour clock” time: E.g., Field 1, 100L for 2hrs. and Field 2, 50L for 2 hrs 15 minutes, from 7.00 pm, text:

F1Hi.2@1900 F2.2.15@1900

If several commands are pending for a night, and a Supervisor (e.g. during field light testing) sends a new command, all other pending commands (for that field only) are deleted. If the lights do not come on at the expected time, please re-send the command. “Change of Mind” (Same Club)  E.g., After sending the command F1.2@1900, to cancel, just text F1.0@1900 5. Preliminary Fault Diagnosis – Lights are not on as expected  Text Stat.1 to the controller (status enquiry).  If the reply is (e.g.) Field 1 On, the controller is OK, but there is a fault in the external lighting circuit.  If the reply is Field 1 Off or Field 1 Blackout, they have been disabled by Council.  If no reply, power to the controller is off, and they may be able to be turned on manually by after-hours staff.